A) Direction buttons
B) SHARE button
C) Touchpad / Touchpad Button - Press the touchpad to use the touchpad button.
E) OPTIONS button
F) Triangle key / circle key / cross key / square key
G) Right Stick / R3 Button - Push the stick down to use it as the R3 button.
H) PS button
I) Stereo headset jack
J) expansion port
K) Left Stick / L3 Button - Push the stick down to use it as an L3 button.
A) R1 button
B) R2 button
C) Light bar - The light bar on the touchpad does not light up on the CUH-ZCT1 series.
D) L1 button
E) L2 button
F) USB port
Press the PS button on the controller, then select a user.
If this is your first time using a controller, or if you want to use the controller on a different PS4 ™ system, you will need to pair it with the system. Connect the controller to your system with a USB cable while the system is on. If you want to use two or more controllers, you must pair each controller separately.
The controller's battery is charged when you connect the controller to your PS4 ™ system with a USB cable. The system must be turned on or in sleep mode. The battery level is shown on the screen when you press and hold the PS button.
While the system is in sleep mode, the light bar will slowly flash orange. When the charging process is complete, the light bar will go out.
You can use the touchpad and the touchpad button for various system functions. The functions available depend on the content used.
To change the speaker volume and other controller settings, select (Settings) in the function screen and then [Devices]> [Controllers].